• 2Phase Nema 17

    This nema 17 cnc stepper motor flange size is 42*42mm, length 34-60mm, holding torque 0.19-0.75Nm, adapted to MR2 two-phase stepper motor drivers.

    step motor banner

Nema17 2Phase Stepper Motors

NEMA 17 1.8 degree, High torque, Low noise, Step Angle: 1.8°, NEMA17, 42x42mm

2phase stepper motor nema17



 HOLDING TORQUE: 0.19-0.75Nm

 High Torque

Low Heat

High Stability


NEMA 17 hybrid stepper motor series motors are high-performance, low-cost stepper motors made by ICAN using high-quality core materials. It has the advantages of high torque, low heat generation, and good running stability.  Our company has strict quality control to ensure high-quality batch consistency of motors. This series of stepping motors are stable and reliable, with superior performance parameters.

high torque stepper motorfeature

Torque is the rotational equivalent of linear force, forms part of the basic specification of a motor. The torque of the motor refers to the torque output by the motor from the crankshaft end. It reflects the load capacity of the motor within a certain range. High torque is mainly attributed to many factors including rare earth magnets, optimized rotors, Stators with maximum winding fill, and laminations, all of which are combined together to realize maximum torque. Increase the output torque of the stepper motor, which means that the efficiency of the motor is higher, and is available without increasing the drive voltage or current.


Improved manufacturing process enables all components of the stepper motor to achieve better matching and a more stable internal structure. Effectively reduce the vibration and noise of the motor during operation. With the advanced current control technology of IRELIA MR series drives, which makes ICAN stepper motor stand out by providing lower noise and smoother operation


The high-strength die-casting end cover design and the low-loss stator lamination design make the stepper motor better thermal conductivity. The optimized stator slot full rate makes the stepper motor generate lower heat and faster heat conduction, thereby greatly reducing the temperature rise of the motor.


Selection Table

The most popular models are:  nema 17 60mm, nema 17 stepper motor 1.7 anema 17 1.2 a, nema 17 40mmnema 17 34mmnema 17 48mm stepper motor. For nema 17 dual shaft stepper motor, its also available! To buy high quality nema 17 stepper motor, please fill in the following form and contact us!

ModelStep Angel(°)Holding Torque(Nm)Current/Phase(A)Resisitance(Ω)Inductance(Mh)Diameter of axle LB (mm)Axial length LA(mm)Length L(mm)N.W.(kg)Matched Driver

■ Motor Dimensions: mm(in)

Torque Speed Curves

torque 42H2P4812A4

Recommended Options

Packing&delivery time


You can contact us using the form on the right.

One of our qualified staff members will get back to you as soon as possible!

addressAddress: 4/F, Block B, RuiLian Zhenxing Industrial Park, Wanjiang District, Dongguan City, Guangdong Province, China

telTel: +86-0769-22327568

faxFax: +86-0769-22327568

mailEmail: inquiry@ican-tech.com

skypeSkype: icantech0099

Send Us Mail

Copyright 2022 Dongguan ICAN Technology Co., Ltd. | All Rights Reserved