· 2phase stepper driver for nema34
· dm860 stepper motor driver
· Step & direction or CW/CCW control
· 2.4-7.2A, 18-60VAC
· 16 different subdivision resolutions
· Output current setting2.4A, 3.1A, 3.8A, 4.5A, 5.1A, 5.8A, 6.4A, 7.2A
· Over-voltage and over-current self-protection
Electrical indexes
Model number | MR7 |
Voltage input | 18-60VAC |
Current output | 2.4-7.2A |
Signal voltage | 3.3-24V |
Input Pulse Width | 250~5E+8ns |
General Specification
Environmental factors | Environmental indexes |
Use occasion | Avoid dust, oil stain and corrosive gas |
Operating temperature | 10℃~+50℃ |
Environment humidity | 40-90%RH (no condensation) |
Vibration | 5.9m/s2 Max |
Storage temperature | -20℃~+125℃ |
Cooling mode | Natural cooling or forced cooling |
The peak current output is set through SW1, SW2, SW3 dial switches
Automatic idle current reduction to reduce heat after the motor stops moving for 0.1 seconds if SW4 is set “off”.
The subdivision value is set through SW5, SW6, SW7, and SW8 dial switches, and a total of 16 subdivision settings are optional.