• 2Phase Nema 23

    The nema 23 step motor flange size is 57*57mm, length 41-98mm, holding torque 0.35-2.6Nm, adapted to MR4/MR5 two-phase stepper motor drivers.

    step motor banner

Nema23 2Phase Stepper Motors

Mini stepper motor, Small size, High torque, Low noise, Step Angle: 1.8°, NEMA11, 57x57mm

2phase nema23 steppermotor
Features:

STEP ANGLE:  1.8°

 FLANGE SIZE:  57mm

 HOLDING TORQUE: 0.35-2.6Nm

 High Torque

Low Heat

High Stability

Customization is available

Nema 23 57byg stepper Selection Table

Notice: nema 23 dual shafts, different holding torque, stepper motor 10kg torque can be customized. Axis is 6.35m/8mm/14mm, keyway, or D-cut. The standard models of nema 23 areas below.

ModelStep Angel(°)Holding Torque(Nm)Current/Phase(A)Resisitance(Ω)Inductance(Mh)Diameter of axle LB (mm)Axial length LA(mm)Length L(mm)N.W.(kg)Matched Driver
57H2P4115A61.80.351.51.86.96.3517410.43MR2/MR4
57H2P5130A41.80.93.00.81.26.3519510.57MR4
57H2P5442A41.81.24.20.41.26.3519540.67MR4/MR5
57H2P5442A4-A1.81.24.20.41.4820.4540.67MR4/MR5
57H2P5442A4-B1.81.24.20.381.3831540.67MR4/MR5
57H2P7842A41.82.14.20.551.96.3520.4781.06MR4/MR5
57H2P7842A4-A1.82.14.20.551.9819.4781.06MR4/MR5
57H2P7842A4-B1.82.14.20.551.7831781.06MR4/MR5
57H2P8440A41.82.34.00.92.7831841.18MR4/MR5
57H2P9850A41.82.64.50.72.4832981.45MR4/MR5
57H2P11242A41.83.04.21.41.88/14211121.5MR4/MR5
We can offer stepper motor from nema 11 to nema 51. The torque ranges from 0.06N.m- 50N.m. Motor customization is available. Contact us for more details.

Contacts

You can contact us using the form on the right.

One of our qualified staff members will get back to you as soon as possible!

addressAddress: 4/F, Block B, RuiLian Zhenxing Industrial Park, Wanjiang District, Dongguan City, Guangdong Province, China

telTel: +86-0769-22327568

faxFax: +86-0769-22327568

mailEmail: inquiry@ican-tech.com

skype skype:icantech0099

Send Us Mail

Copyright @ Dongguan ICAN Technology Co., Ltd. | All Rights Reserved