Most popular models are available: nema 23 3nm, nema 23 112mm, nema 23 76mm, nema 23 stepper motor 425oz, nema 23 3a, nema 23 4a, nema 23 4.2 a, etc.
Nema23 motors are high-performance, low-cost stepper motors made by ICAN using high-quality core materials. It has the advantages of high torque, low heat generation, and good running stability.
Torque is the rotational equivalent of linear force, forms part of the basic specification of a motor. The torque of the motor refers to the torque output by the motor from the crankshaft end. It reflects the load capacity of the motor within a certain range. High torque is mainly attributed to many factors including rare earth magnets, optimized rotors, Stators with maximum winding fill, and laminations, all of which are combined together to realize maximum torque. Increase the output torque of the stepper motor, which means that the efficiency of the motor is higher, and is available without increasing the drive voltage or current.
Improved manufacturing process enables all components of the stepper motor to achieve better matching and a more stable internal structure. Effectively reduce the vibration and noise of the motor during operation. With the advanced current control technology of IRELIA MR series drives, which makes ICAN stepper motor stand out by providing lower noise and smoother operation
The high-strength die-casting end cover design and the low-loss stator lamination design make the stepper motor better thermal conductivity. The optimized stator slot full rate makes the stepper motor generate lower heat and faster heat conduction, thereby greatly reducing the temperature rise of the motor.
Nema 23 57byg stepper Selection Table
Notice: nema 23 dual shafts, different holding torque, stepper motor 10kg torque can be customized. Axis is 6.35m/8mm/14mm, keyway, or D-cut. The standard models of nema 23 areas below.
|Model||Step Angel(°)||Holding Torque(Nm)||Current/Phase(A)||Resisitance(Ω)||Inductance(Mh)||Diameter of axle LB (mm)||Axial length LA(mm)||Length L(mm)||N.W.(kg)||Matched Driver|
|57H2P4115A6 a>||1.8||0.35||1.5||1.8||6.9||6.35||17||41||0.43||MR2 a>/MR4 a>|
|57H2P5130A4 a>||1.8||0.9||3.0||0.8||1.2||6.35||19||51||0.57||MR4 a>|
|57H2P5442A4 a>||1.8||1.2||4.2||0.4||1.2||6.35||19||54||0.67||MR4 a>/MR5 a>|
|57H2P5442A4-A a>||1.8||1.2||4.2||0.4||1.4||8||20.4||54||0.67||MR4 a>/MR5 a>|
|57H2P5442A4-B a>||1.8||1.2||4.2||0.38||1.3||8||31||54||0.67||MR4 a>/MR5 a>|
|57H2P7842A4 a>||1.8||2.1||4.2||0.55||1.9||6.35||20.4||78||1.06||MR4 a>/MR5 a>|
|57H2P7842A4-A a>||1.8||2.1||4.2||0.55||1.9||8||19.4||78||1.06||MR4 a>/MR5 a>|
|57H2P7842A4-B a>||1.8||2.1||4.2||0.55||1.7||8||31||78||1.06||MR4 a>/MR5 a>|
|57H2P8440A4 a>||1.8||2.3||4.0||0.9||2.7||8||31||84||1.18||MR4 a>/MR5 a>|
|57H2P9850A4 a>||1.8||2.6||4.5||0.7||2.4||8||32||98||1.45||MR4 a>/MR5 a>|
|57H2P11242A4||1.8||3.0||4.2||1.4||1.8||8/14||21||112||1.5||MR4 a>/MR5 a>|
■ Nema 23 cnc stepper motor dimensions: mm(in)
Nema 23 high torque