• Stepper Motor With Spur Gearbox

    This geared stepper motor has two sizes, nema23 and nema34. Customization is available.

Stepper With Spur Gearbox

This type of geared stepper motor has been optimized and is made of high-quality 0.35MM silicon steel sheet and rare earth magnetic steel. The air gap is small and the torque is large. It has the advantages of high anti-resonance characteristics and low heat generation.

Features:

High torque and low noise.

Low-temperature rise and stable operation.

Economical.

Low speed with low vibration

Customization is available

Description

Gearbox is a mechanical unit or component consisting of a series of integrated gears within a housing.  In the most basic sense, a gearbox functions like any system of gears, it alters torque and speed between a driving device like a motor and a load. Spur gearboxes, smooth and quiet operation, wide range of gear ratios, long life, and maximum efficiency.

 The role of spur gearbox

Stepper motors are known for their accurate positioning capabilities and high torque delivery at low speeds, but they require careful sizing to ensure the motor matches the load and application parameters, to minimize the possibility of lost steps or motor stalling. Adding a gearbox to a stepper motor system can improve the motor’s performance by decreasing the load-to-motor inertia ratio, increasing torque to the load, and reducing motor oscillations.

 Feature

● High torque and low noise.

● Low-temperature rise and stable operation.

● Economical.

● Low speed with low vibration

● Self-detection, over-current, over-voltage, under-voltage protection

● Customization is available

 Application

ICAN geared stepper motor is widely used in cars, robots, packaging industry, automated production lines, and other automated equipment.

Nema23

■Geared stepper motor nema 23 supply specification

SeriesFlangeItemStep Angel(°)Output Holding Torque(Nm)Current
phase(A)
Shaft dia(mm)Shaft length(mm)Motor length(mm)Gear RatioMatched driverDownload
Stepper motor with spur gearboxNema 2357H2P0930A8-G101.893.08251081:10MR4
57H2P1830A8-G201.8183.05251131:20MR4

■Geared stepper motor nema 23 dimension

gear stepper motor nema23

■ High torque stepper motor with gearbox torque curves

Nema34

■ Nema 34 gearbox specification

SeriesFlangeItemStep Angel(°)Output Holding Torque(Nm)Current
phase(A)
Shaft dia(mm)Shaft length(mm)Motor length(mm)Gear RatioMatched driverDownload
Stepper motor with spur gearboxNema 3485H2P6045A4-G12.51.8604.515321711:12.5MR7
85H2P8045A4-G201.8804.515321711:20MR7A
86H2P6842A4-G1.83.25.01227691:5/1:10/1:20MR7A
85H2P11860A4-G1.866.012271181:5/1:10/1:20MR7A

■ Nema 34 gearbox dimension

■Geared stepper motor nema34 torque Speed Curves

Recommended Options

Driver for Nema23

Driver for Nema34

Accessories choices

Download
FlangeItemDownload
Nema 1742H2P0712A4-G30
Nema 2357H2P0930A8-G10
57H2P1830A8-G20
Nema 3485H2P6045A4-G12.5
85H2P8045A4-G20
86H2P6842A4-G
85H2P11860A4-G
Packing&delivery time

Ask a question





Copyright 2018 Dongguan ICAN Technology Co., Ltd. | All Rights Reserved